UPS F.906
ON - LINE CLEANING BWTSS
GENERAL DESCRIPTION :
The UPS F. 906 is a liquid boiler feed water treatment which incorporate the use of chelant technology for the prevention of waterside foulness in steam generating equipment. The product contains chelant and chelant/polymer/phosphate blends specially formulated to handle specific treatment need. The UPS F. 906 product incorporates the proper chelant/polymer type/phosphate ratios to handle metallic and hardness contamination, or to clean deposits from waterside surfaces while the boiler is in service.
USAGE :
The UPS F. 906 product can be mixed with other boiler treatment but should be added to the boiler feed water line using a stainless steel injection nozzle at a point beyond the discharge of the boiler feed equipment. At solution strength and elevated temperature, chelating agents can corrode mild steel and copper alloys, so 340 stainless steel is recommended for all feed equipment. Dosage requirement and the proper formulation will be determined after a thorough survey of your feed water quality and boiler operating conditions are made by your UPS Technical Service Representative.
TYPICAL PHYSICAL PROPERTIES
Appearance………………………..………Pale straw liquid
Flash Point………………………………………………None
pH……………….……………………………..….10.0 – 10.2
Specific Gravity @ 75º F………………….…….1.08 – 1.12
Solubility in water…….………….………Miscible with water
REGULATORY STATUS :
The UPS F. 906 product contains formulation which is in compliance with FDA requirement for use in boilers where the steam comes in contact with food. It also contains products which area acceptable for use in USDA inspected plants.
HANDLING AND STROGES
UPS F. 906 product is strongly alkaline. Do not transfer to aluminum or galvanizing container. This product may cause severe eye damage and skin irritation. Harmfull if swallowed. Avoid eye skin contact. Keep out of reach of children. Wear eye protection and rubber gloves at all time when handling these product. In case of eye contact, immediately flush effected area with large amounts of water of 5 minutes and seek medical attention. For skin contact, wash effected area with soap and plenty of water.
